Where Should the Outdoor Thermometer Be Placed?
Fleeting- External reference: https://www.theraingauge.com/where-to-place-an-outdoor-temperature-sensor/
- External reference: https://sciencing.com/proper-location-outdoor-thermometer-5571432.html
- External reference: https://the-weather-station.com/where-should-the-thermometer-be-placed-for-an-accurate-temperature-reading/
Where should the thermometer be placed ?
outdoor sensor should be placed 1.2 to 1.8 meters off the ground level. This is necessary to ensure that the ground temperature doesn’t affect the thermometer temperature readings.
placed in a shady and protected location and should not have contact with precipitation(dew drops)
shouldn’t be too close to the building as the inside temperature might affect the readings
should be placed at a distance of four times the height of your building. The sensor should not be directly exposed to sunlight.
Airflow is important for accurate temperature readings. Thus, place the thermometer in a flat area where the air moves freely.
it at least 30 meters away from the floor and roadways. Best location to place it would be above dirt or grass.
No matter what is the actual temperature if you place the sensor in direct sunlight, it will show higher temperature readings
covered porch would be an ideal location as you can monitor it easily and get good, precise results
sensor should be placed 1.2 to 1.8 meters (4 to 6 feet) off the ground. This will prevent ambient ground temperature from affecting the reading.
— https://sciencing.com/proper-location-outdoor-thermometer-5571432.html
NWS standards say the sensor should be placed a distance four times the height of the nearest building. So if your roof is 6 meters (20 feet) high, the sensor should be placed 24 meters (80 feet) from your house.
— https://sciencing.com/proper-location-outdoor-thermometer-5571432.html
Direct sunlight will give a higher reading. The sensor should be located where neither direct nor indirect solar radiation will shine on it, if possible. If it is directly in the sunlight part of the day, readings during those times will be higher. Building a small enclosure with ample ventilation and at the proper height and distance from your house may be the best way to get accurate readings.
— https://sciencing.com/proper-location-outdoor-thermometer-5571432.html
Airflow is important for good readings. Therefore, the sensor should be placed in a flat area where air moves freely and not in an area sheltered from airflow or at the base of an incline.
— https://sciencing.com/proper-location-outdoor-thermometer-5571432.html
Both asphalt and concrete have a tendency to store and emit heat, so the sensor should be at least 30 meters (100 feet) away from paved roadways and sidewalks. Locations above dirt or grass are ideal.
— https://sciencing.com/proper-location-outdoor-thermometer-5571432.html
you can still obtain results from your thermometer, bearing in mind you are measuring only the air temperature near your building and not the true air temperature in your wider area
— https://sciencing.com/proper-location-outdoor-thermometer-5571432.html
Mount at least 4 to 6 feet off the ground.
Provide good airflow and wind.
Be aware of heat sources such as HVAC units, dryer vents, or outdoor equipment(generators)
Protect from elements
Place for best signal strength to your display for reliable measurement.
— https://www.theraingauge.com/where-to-place-an-outdoor-temperature-sensor/
key factor when placing your outdoor temperature sensor is installing it at eye level. Installing it too low or too high might give you inaccurate readings since air temperatures are cooler near ground level and warmer near upper levels because of convection currents in the atmosphere. So if possible, install your sensor around 4-5 feet off the ground for maximum accuracy.
— https://www.theraingauge.com/where-to-place-an-outdoor-temperature-sensor/